Panasonic AV-HS6000 2 M/E Live Switcher Main Frame & Control Panel (Dual Redundant Power Supplies) - Manual (Page 155)

– 155 –
Chapter 8 System Menu — Setting the external connection
2
Select [ID] and select an item.
f Select [Mainframe], [MainPanel], [SubPanel1], or [SubPanel2] as the setting target.
3
Select the port where you want to assign a function from the port list in the left column.
f Select [Select] to filter the port list in the left column. Select a color from [All], [GPI Out1‑6], [GPI Out7‑12], [GPI Out13‑18], [GPI Out19‑24], [GPI
Out25-30], [GPI Out31-36], [GPI Out37-42], and [GPI Out43-48].
4
Select the function to assign from the function list in the right column.
f Select [Type] to select the type of output signal from the function list in the right line.
- [LowEdge]: Falling edge
- [HighEdge]: Rising edge
- [LowLevel]: Low level
- [HighLevel]: High level
f Select [Group Select] to switch the group of the function list in the right column.
For details, refer to “GPI output function list” (page 155).
f For tally output assignment, select [Tally Select] to set the tally group.
f For details, refer to “Tally output function list” (page 155).
5
Select [Assign].
f The function is assigned to the button selected in the step 2 .
f Select [Test Fire] to test the signal output operation of the set GPI port. The pulse of Low level is output for approximately 0.05 seconds.
r GPI output function list
Describes about when [ME1], [ME2], [DSK], [USK], or [OTHER] is selected in [Group Select].
[Group Select] Signal name Description [Type]
[ME1], [ME2]
KEY1 ON to KEY4 ON Key on [LowLevel] or [HighLevel]
KEY1 CUT to KEY4 CUT Cut transition of a key was executed
[LowEdge] or [HighEdge]
CUT Cut transition was executed
KEY1 Trans to KEY4 Trans Key transition in progress
[LowLevel] or [HighLevel]
AUTO Auto transition in progress
[DSK]
KEY1 ON to KEY4 ON DSK on [LowLevel] or [HighLevel]
KEY1 CUT to KEY4 CUT Cut transition of the DSK was executed [LowEdge] or [HighEdge]
KEY1 Trans to KEY4 Trans DSK transition in progress [LowLevel] or [HighLevel]
[USK] USK1 ON - USK4 ON On/off of USK1 ON to USK4 ON. [LowLevel] or [HighLevel]
[OTHER]
No Assign No function assigned ―
Event MEM Event set by event memory executed [LowEdge] or [HighEdge]
FTB ON FTB on
[LowLevel] or [HighLevel]
FTB Trans FTB transition in progress
@ @ NOTE
t When a plug-in software application is introduced, some functions inherent to that application may be added as functions to be assigned.
r Tally output function list
f This table describes cases when [Tally Group1], [Tally Group2], [Tally Group3], or [Tally Group4] is selected in [Group Select].
[Tally Select] Signal name Description [Type]
[Input1-20] SDI IN1 to SDI IN20 SDI input signals 1 to 20
[LowLevel] or [HighLevel]
[Input21-40]
SDI IN21 to SDI IN32 SDI input signals 21 to 32
DVI IN1 to DVI IN2 DVI-D input signal
[Internal]
Still 1V to Still 4V Video memory (photo) 1 to 4 videos
Still 1K to Still 4K Video memory (photo) 1 to 4 keys
Clip 1V to Clip 4V Video memory (video) 1 to 4 videos
Clip 1K to Clip 4K Video memory (video) 1 to 4 keys
CBGD1, CBGD2 Color background 1, 2
[MEOut]
ME1PGM, ME2PGM Program video signal
ME1PVW, ME2 PVW Preview video signal
ME1CLN, ME2CLN Clean signal
DSKPGM1, DSKPGM2 Program video signal
DSKPVW1, DSKPVW2 DSK preview video signal
DSK1CLN to DSK4CLN Clean signal
[AUX] AUX1 to AUX16 AUX video signal