Alienware AW2723DF 27" 1440p 280Hz Gaming Monitor (Lunar Light) - Manual (Page 36)

36 | Setting up the monitor
4. Plug the power cables for your computer and monitor into a wall outlet.
5. Turn on the monitor and the computer.
If your monitor displays an image, installation is complete. If it does not
display an image, see Common problems .
Removing the monitor stand
NOTE: To prevent scratches on the screen when removing the stand,
ensure that the monitor is placed on a soft surface and handle it carefully.
NOTE: The following steps are specially for removing the stand that is
shipped with your monitor. If you are removing a stand that you
purchased from any other source, follow the setup instructions that are
included with the stand.
To remove the stand:
1. Turn off the monitor.
2. Disconnect the cables from the computer.
3. Place the monitor on a soft cloth or cushion.
4. Carefully slide and remove the I/O cover from the monitor.
5. Disconnect the cables from the monitor and slide them out through the
cable-management slot on the stand riser.