Exit speed adjustment – iSys iTerra Elite II Color LED Plotter User Manual

Page 34

Text mode
Original mode

June 2011: Revision 002

Exit Speed Adjustment

If the image is smearing, increase the exit speed.

STEP 1

STEP 2

Select Menu on the printer menu,

Scroll down the menu and select Calibration.

STEP 3

STEP 4

Scroll down the Calibration menu.

Select Exit Speed Adjustment.

STEP 5

Adjust the exit speed by increasing the number in
increments of two. Select Enter and then Online. This
will take you back to the main printer menu.