iSys iTerra Elite II Color LED Plotter User Manual
Page 31
June 2011: Revision 002
31
STEP 7
STEP 8
To remove a sheet from the central area, separate
the sheet from the belt surface and withdraw the
sheet.
To remove a sheet in the fuser; push the two retaining
levers (e) towards the rear of the printer t0 release the
fuser. Withdraw the fuser unit using the handle (f).
STEP 9
Press release lever (g) and pull trapped paper from the
fuser.
NOTE: If the sheet is well advanced into the fuser
(only a short length is still visible), do not attempt
to pull it back.