iSys iTerra Elite II Color LED Plotter - Manual (Page 14)

June 2011: Revision 002
14
7. Menu Functions
Feeder Operator Panel
1. Display Displays the feeder status and
any error messages 2. Load Button Press to complete loading
paper
Printer Operator Panel
1.Ready LED ON: Ready to receive data
BLINKING:
Processing data.
OFF: Offline 6. Attention LED ON: A warning occurs. Printing may be
possible (e.g low toner)
BLINKING: An error occurs. Printing not
possible (e.g toner empty)
OFF: Normal Condition
2. Display Displays the printer Status and any error
messages. 7. Back Button Returns to the previous higher level menu
3. Menu Scroll
Buttons Enters the Menu mode. IN Menu mode,
forwards or reverses the menu item
displayed.
Press for 2 seconds or longer to jump from
top to bottom 8. Enter Button In the ONLINE or OFFLINE mode: enters
the Menu mode.
In the Menu mode: determines the setting
selected.
4. On Line
Button Switches between ONLINE and OFFLINE
Scrolls the HELP screen
Forced printing on the paper currently
loaded when
pressed with “WONG
PAPER” or “WRONG PAPER SIZE”
displayed.
9. Cancel Button Deletes the data being printed or received
when pressed for two seconds or longer.
Deletes the data when pressed for two
seconds or longer with WRONG PAPER
SIZE, RUN OUT OF PAPER, TRAY 1 IS
OPEN, or TRAY 1 IS NOT FOUND is
displayed.
Exits the menu and goes ONLINE when
pressed in the Menu mode.
5. Help Button Provides advice when an error such as
incorrect paper size occurs 10.Power Save/
Wake up Button Pressing this button switches the machine
into sleep or wake- up mode. Refer to
“Power saving mode” page 12.
2
1