H3C Technologies H3C S9500E Series Switches - Manual (Page 124)

114
• LSR2GT48LEB1
• LSR1GT48LEC1
• LSR2GP24LEB1
• LSR1GP24LEC1
• LSR1GP48LEB1
• LSR1GP48LEC1
• LSR1GP48LEF1
• LSR2GV48REB1
• LSR1XP16REB1
• LSR1XP16REC1
NOTE:
•
On the LSR2GT24LEB1 and LSR1GT24LEC1, the autosensing RJ-45 copper ports are numbered from 1
to 16. For the LED description, see
Table 47 . The copper ports are numbered from 17 to 24, and the fiber
ports are numbered from 25 to 32. For the LED description, see Table 49 .
• On the LSR2GP24LEB1 and LSR1GP24LEC1, the GE fiber ports are numbered from 1 to 16. For the LED
description, see
Table 47 . The fiber ports are numbered from 17 to 24, and the copper ports are
numbered from 25 to 32. For the LED description, see Table 49 .
Table 47 Interface LED description
LED Status Description
LINK/ACT (green)
Steady on The interface is connected.
Off The interface is not connected normally.
Flashing Data is being transmitted and/or received on the interface.
LINK and ACT LEDs
Each interface on the following LPUs has a LINK LED and an ACT LED:
• LSR1XP2LEB1
• LSR1XP2LEC1
• LSR1XP4LEB1
• LSR1XP4LEC1
• LSR1XP4LEF1
Table 48 Interface LED description
LED Status Description
LINK
Off No link is present.
Steady on A link is present.
ACT
Off No data is being transmitted or received.
Flashing Data is being transmitted and/or received.