ATL Telecom AM2048 - Manual (Page 4)

ascom
telecom USER GUIDE AM768A/AM2048A
4
Issue 8
Definitions:
Exposed Environment
A TELECOMMUNICATIONS NETWORK is considered to be an exposed
environment if one or more conditions for an unexposed environment are not fulfilled.
Unexposed Environment
A TELECOMMUNICATIONS NETWORK is considered to be an unexposed
environment if the following conditions apply to all parts of the network
a) The possible effect of indirect lightning has been reduced by measures described
in IEC 61312-1.
b) The possibility of having different earth potentials has been reduced by
connecting all equipment within the network to the same equipotential bonding
system (see HD 384).
c) The possibility of power cross/contact has been reduced (see HD 384).
d) The possibility of induced transients and voltages has been reduced.
Caution – Laser Product
The Optical Interface is classified as a CLASS 1 LASER PRODUCT.
Caution – Electrostatic sensitive device
Electro-static discharge (ESD) Warning:
Antistatic precautions should be observed at all times.
If the unit is power fed from the DSL line interface then a functional earth MUST be
connected. (See Section 4 on Installation)
EMC Statement
Manufacturers Declaration*
Ascom Telecommunications Limited declares that this product is in conformity with the
essential requirements of the ‘R&TTE directive 1999/5/EC’.
* A copy of the Declaration of Conformity is available upon request from Ascom Telecommunications Ltd.
This is a Class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate
measures.