ATL Telecom AM2048 - Manual (Page 35)

ascom
telecom USER GUIDE AM768A/AM2048A
35
Issue 8
5.7.3 V.35
V.35 refers to ISO 2593 for the connector pin out.
Circuit
Interchange Circuit Name Pins
A B
Definition
102 Signal ground or Common Return B
103 ∅ Transmitted Data P S From DTE to DCE
104 ∅ Received Data R T From DCE to DTE
105 Request To Send (RTS) C ON transmit Data
OFF transmit binary 1.
106 Ready For Sending (RFS) D ON DCE ready to accept data
OFF DCE not ready
107 Data Set Ready (DSR) E ON DCE ready to operate
OFF DCE not ready to operate
109 Received Signal Detector F ON line signal is good
OFF line signal out of limits
113 ∅ Terminal Signal Element Timing U W 103 changes at
OFF to ON of 113
114 ∅ Transmitter Signal Element Timing Y AA 103 changes at
OFF to ON of 114
115 ∅ Receiver Signal Element Timing V X Centre of bit on 104
ON to OFF on 115
140 Remote Loopback N
141 Local Loopback L
142 Test Indicator NN
Circuits marked ∅ are balanced V.35, unmarked circuits are to V.28
Circuit marked
The clock rate is set up using the “Configuration > User Port” Menu.
Select the required value of N for Nx64K circuits.
DTE – DCE mode may be selected using Links 1 and 2.