ifm electronic JN2100 v.2.0 - Manual (Page 5)

UK
Inclination sensor JN
5
2.3 Electrical connection
Disconnect the unit externally before handling it�
The connection terminals may only be supplied with the signals indicated in the
technical data and/or on the device label and only the approved accessories of ifm
electronic gmbh may be connected�
2.4 Tampering with the device
In case of malfunctions or uncertainties please contact the manufacturer� Any
tampering with the device can seriously affect the safety of operators and
machinery� This is not permitted and leads to the exclusion of any liability and
warranty claims�
3 Functions and features
The 2-axis inclination sensor with CANopen interface enables angle levelling and
position detection of mobile machines�
Typical applications are, for example, the position detection of access platforms,
levelling of mobile cranes or set-up of mobile machines�
● 2-axis inclination sensors with a measuring range of:
JN2101: ± 45°
JN2100: ± 360°
● High resolution and precision
● CANopen interface (CiA DS-301, device profile CiA DSP-410)
● The module supports "node guarding" and "heartbeat"; "guard time", "life time
factor" as well as "heartbeat time" can be configured�
● High sampling rate and band width
● Configurable vibration suppression
● Functions
– A transmit PDO (RTR, cyclical, event-controlled, synchronised)
– SYNC consumer (synchronised transmission of the transmit PDO after
reception of a SYNC telegram)
– EMCY producer (exceeding of limit value, monitoring of the inside device
temperature)
– Failure monitoring by means of heartbeat or node guarding / life guarding
– Freely configurable limit frequency (digital filter)
● Robust metal housing
● Suitable for industrial applications