Formax ColorMaxLP Operator Manual - Manual (Page 79)

ColorMaxLP Label Printer
Appendix
79
Menu/Option Description
Setup
12
Language 2
Select the display language for the printer control panel.
Supported languages are: English, French, German, Spanish, Italian,
Traditional Chinese, Simplified Chinese, and Japanese.
Reset 2 Restore the default factory settings.
List Setup Print the key parameters of the printer in a 4” x 6” label format.
Security Display the current security level:
• Level 0 (operator) – The user can access all the functions needed to
print, but cannot change printer parameters via the control panel.
• Level 1 (supervisor) – The user can access certain printer parameters.
A password is required to access this level.
• Level 2 (administrator) – All parameters are enabled. A password is
required to access this level.
Passwords are set using the EWS (see Embedded Web Server (EWS) on
page 35).
LCD Contrast 1 Adjust the contrast of the text against the background (–3 to 3).
Use
and to increase or decrease the value.
LCD Brightness 1 Adjust the brightness of the back light (–3 to 3).
Use
and to increase or decrease the value.
Date/Time 2
Set the printer clock ( YYYY/MM/DD HH:MM:SS ).
1. Press and to set each digit (0 to 9).
2. Press to move to the next digit.
Unit 1 Unit used for Adjust Offset, either inch or mm. Applies to both Control
Panel and EWS units.
Label Select which type of label stock will be used for printing test pages.
Options are Continuous or Gap.
Page Cutting Select the printer default print mode. The available modes are
• Sheet per cut
• Print and Present
• Roll to Roll (Leave first label blank)
• Roll to Roll (Print from first label)
• Roll to Roll (Multiple job queue
When the use printer setting is selected in the driver, the printer will use
this mode.