Formax ColorMaxLP Operator Manual - Manual (Page 40)

40
Using the Printer
Formax
Change Passwords
1. Log in to the EWS.
a On the Windows Start menu, select
Formax > ColorMaxLP Label Printer > Toolbox.
b Click
ColorMaxLP Label Printer to launch the default web browser and open the
EWS for your printer.
c Click Login to log in with your admin password.
2. Select Security Setup, then select Printer Password.
3. Set the password and click Submit.
• The EWS password can have 3 to 12 alphanumeric characters. Special characters
are not allowed.
• The control panel password must contain 3 digits.
Change Security Level for Printer Settings
The administrator can change the security level for the following protected printer
settings, which are enabled at Level 1 by default.
1. Log in to the EWS.
2. Select Security Setup followed by Printer Security.
3. From the dropdown list, select the minimum security level allowed to access each
setting.
For example, if you set Language to Level 0 - Operator, then all security levels will
have access to this setting.
4. Click Submit.