Formax ColorMaxLP Operator Manual - Manual (Page 59)

ColorMaxLP Label Printer
Printer Maintenance
59
9. Carefully align the service station with the guide rails and slide it into the print
engine.
10.Manually rotate the positioning gear backwards while uniformly pushing the service
station to move the service station into the print engine.
Figure 7 Positioning gear for service station
11.Reinstall the front panel: Reconnect the two cables to the front panel and replace
the screws.
12. Close the clamshell
13. Install the printhead, close the blue latch, and close the covers.
14. Plug the power cord back in and turn the printer on.
Never turn on the Printer with the Service Station disconnected!!!
guide rail
guide rail