American Time SiteSync IQ - Manual (Page 44)

© American Time
44
Glossary
Appendix
Tr
oubleshooting
Clock
Installation
System Contr
oller
Installation
Intr
oduction
SiteSync IQ Installation Manual
Remote Connect Web Interface
Glossary
Appendix
Tr
oubleshooting
Clock
Installation
System Contr
oller
Installation
Intr
oduction
GPS Tab:
The GPS Tab contains status information of the GPS antenna. This displays the signal status, signal strength, and the last signal received.
Figure 14
1. GPS Time Updates: This allows the user to enable or disable the GPS time synchronization source. The Update button must be
pressed for this change to take effect.
2. Tracked Satellites: This displays the number of tracked satellites. There should be a minimum of 3 tracked satellites for proper
reception.
3. Signal Status: This displays if the GPS signal has been received within the last 2 hours.
4. Signal Last Received: This displays the date and time of the last GPS signal reception.
CDMA Tab:
The CDMA Tab contains status information for the CDMA modem. This displays the signal strength, signal status, last signal received, and the
CDMA bias.
Figure 13
1. CDMA Time Updates: This allows the user to enable or disable the CDMA time synchronization source. The Update button
must be pressed for this change to take effect.
2 Signal Strength: This displays the signal strength 1-10 (10=best)
3. Signal Status: This displays if the CDMA signal has been received within the last 2 hours.
4. Signal Last Received: This displays the date and time of the last CDMA signal reception.
5. CDMA Bias: This allows the user to bias the time received by their CDMA modem. A user may have to do this if the location
of the system controller is near a time zone border and the CDMA time is off (typically 1 hour). The Update button must be
pressed for this change to take effect.