American Time AllSync Plus - Manual (Page 33)

33
© American Time
AllSync Plus Clock Installation
& Operation Manual
Glossary
Appendix B LED
Illumination
Appendix A
Specifications
Tr
oubleshooting
General
Operation
Installation
Intr
oduction
Appendix B - LED Indication
Startup diagnostics routine
1. 5 sec. – solid red only
2. 1 sec. – OFF
3. 1 sec. – Green (DIP Switch 1 ON) or Red (DIP Switch 1 OFF)
Or
4. 1 sec. – OFF
5. 1 sec. – Green (DIP Switch 2 ON) or Red (DIP Switch 2 OFF)
Or
6. 1 sec. – OFF
7. 1 sec. – Green (DIP Switch 3 ON) or Red (DIP Switch 3 OFF)
Or
8. 1 sec. – OFF
9. 1 sec. – Green (DIP Switch 4 ON) or Red (DIP Switch 4 OFF)
Or
10. 2 sec. – OFF
11. Continue with normal operation
Note: For normal operation all DIP switches should be on or green during the startup diagnostics.
Note: If the circuit board has not received power for over 30 minutes it may cycle through the startup diagnostics
several times while the power cell is charging.