American Time AllSync Plus - Manual (Page 10)

© American Time
10
AllSync Plus Clock Installation
& Operation Manual
Glossary
Appendix B LED
Illumination
Appendix A
Specifications
Tr
oubleshooting
General Operation
Installation
Intr
oduction
Installation
Metal Round Double Dial Clock Installation
Warning:
The AllSync Plus metal double dial clock should be mounted according to these instructions to meet UL
clock listing.
1. Remove the AllSync Plus clocks, double dial ring, wiring harnesses,
backbox plate and plastic bushings from the packaging.
2. Insert plastic bushing into box plate to protect wires
3. Thread back box wire harnesses through double dial ring base and box
plate.
4. Insert 1 1 /
2
" screws into either side of double dial ring. Thread both
screws half way through ring using same threaded hole.
Note: ceiling mount screw location should be directly above ring base
and wall mount screw location should be 90 degrees from base. (Wall
mount shown).