Microtel Series 500 - Manual (Page 65)

58
Analog Input Category
2 “Please Select the Analog Input Channel” [Enter XX]
“Analog Input Channel XX, Ready” [Enter Digit]
1 System Recites Analog Channel ID Message
# “Please Enter the ID Message Now” [Speak Message]
2 “Analog Input Channel XX is (in Hi Alarm, Lo Alarm or Normal), the Reading is RRRR”
3 “Analog Input Channel XX Mode is (Active, Not Active, or Not Available)”
#
“Toggles and Recites Current Mode
4 “Analog Input Channel XX Will Call List Number LL”
# ”Enter the List Number” [Enter LL]
Digital Output Category
3 “Please Select the Output Channel” [Enter XX]
“Output Channel XX, Ready” [Enter Digit]
1 System Recites Output Channel ID Message
# “Please Enter the ID Message Now” [Speak Message]
2 “Digital Output Channel XX is (On or Off)”
# “Toggles and Recites Current Condition
Intercom Category
4 “Please Select the Intercom Function” [Enter XX]
1 Intercom
On
# Toggles Audio Direction Between Talk and Listen
* Turns Intercom Function Off
Voicemail Category
5 “Please Select the Voicemail Message Function” [Enter XX]
1 System Recites Voicemail Message or States Unavailability
# “Please Enter the Voicemail Message Now” [Speak Message]
2 “The Voicemail Telephone Number is (number)”
#
“Please Enter the Voicemail Telephone Number” [Enter Digits followed by*]
3 System Hangs Up and Dials the voicemail Telephone Number
4 System Clears the Voicemail Message and States Unavailability
5
Telephone List Category
6 “Please Select the List Number” [Enter LL] – “List LL, Position 01, Ready”
1 List LL, Position NN, Ready
# “Please Enter the Position Number in List” [Enter Position NN]
2 Advance to Next Position in List “List LL, Position NN, Ready”
3 Return to Previous Position in List “List LL, Position NN, Ready”
4
“Directory Number DD is Telephone Number (telephone number)”
# “Please Enter Directory Number” [Enter Digits DD or 00 to Delete]
5
System Recites List Number, Position Number, Directory Number and Telephone Number
3
“List LL Start Point Number NN”
# “Please Enter the Start Point in List” [Enter NN, Digits 01 – 16]