Interlogix UltraView IP PTZ 36X Camera User Manual - Manual (Page 44)

Chapter 5: Motion setup
40 UltraView IP PTZ 36X Camera User Manual
Click the Del button to delete the current home postion and the Call button to call
up the current home position.
Preset position
A preset position is a pre-defined camera view that can be used to quickly steer
the camera to a specific location, for example, when an alarm is triggered or
when the user requests it. See Figure 17 below.
The camera supports up to 255 presets, several of which have predefined
functions. Predefined presets cannot be deleted. See “Using predefined presets”
on page 75 for further information on these presets and their functions.
Figure 17: Preset menu screen
PTZ control buttons
Table 6: Preset menu description
Parameter Description
Preset SN Displays the selected preset number.
Preset status Displays whether the preset has been already defined.
Preset label Specifies the preset name.
Save Saves any changes made.
Del Deletes the selected preset.
Note: Predefined presets cannot be deleted.