Interlogix UltraView IP PTZ 36X Camera User Manual - Manual (Page 43)

Chapter 5: Motion setup
UltraView IP PTZ 36X Camera User Manual 39
Park action
This is the action that will run automatically after the dwell time (Park time).
Enable the park action option and then select one of the options:
 Auto scan. The camera scans left to right and then back again, right to left.
 Frame scan. The camera scans continuously, frame by frame.
 Random scan. The camera randomly scans either horizontally or vertically.
 Patrols (preset tours) 1 to 8
 Patterns (shadow tours)
 Presets
 Panorama scan. The camera simultaneously scans horizontally and vertically.
 Tilt scan. The camera scans up and down.
The default setting is Disable.
Home preset position
The camera moves to this home position when it starts up.
Figure 16: Home position screen
You can either manually move the camera to the desired home position using the
PTZ controls or select a predefined preset position. Click
Save to save this
position as the home position.