Chapter 3 using the web browser, Checking your web browser security level, Configuring ie active x controls – Interlogix UltraView IP PTZ 36X Camera User Manual User Manual
Page 17
UltraView IP PTZ 36X Camera User Manual
13
Chapter 3
Using the Web browser
The camera can be configured and controlled using an internet browser such as
Microsoft Internet Explorer (IE). The procedures described use Microsoft Internet
Explorer (IE) Web browser.
You must have administrator rights on your PC in order to configure the cameras
over the internet.
Checking your Web browser security level
When using the Web browser interface, you can install ActiveX controls to
connect and view video using Internet Explorer. However, you cannot download
data, such as video and images due to the increased security measure.
Consequently you should check the security level of your PC so that you are able
to interact with the cameras over the Web and, if necessary, modify the Active X
settings.
Configuring IE Active X controls
You should confirm the ActiveX settings of your Web browser.
To change the Web browser’s security level:
1. In Internet Explorer, click
Internet Options
on the
Tools
menu.
2. On the Security tab, click the zone to which you want to assign a Web site
under “Select a Web content zone to specify its security settings”.
3. Click
Custom Level
.
4. Change the
ActiveX controls and plug-ins
options to
Enable
and click
OK
.
- Or -
Under
Reset Custom Settings
, click the security level for the whole zone in
the Reset To box, and select
Low
. Click
Reset
. Then click
OK
to the Internet
Options Security tab screen.
5. Click
Apply
in the
Internet Options
Security tab screen.