Interlogix TVE Series - Manual (Page 34)

30 TVE-400/800-1600 H.264 IP Video Encoder User Manual
2. Select camera for which to set up tamper-proof detection.
3. Check the Tamper-Proof box.
Note: Under Area Settings , the full screen is set for tamper-proof detection.
This cannot be changed.
4. Select the Arming Schedule tab and click Edit to modify the arming
schedule for video loss detection. The configuration is the same as that for
the arming schedule for motion detection. See page 24 for further information.
5. Select the Linking Method tab. Then select the response method to notify
you of the alarm.
6. Click Save to save the settings.
System notification
Setting up system notifications instructs the encoder to alert you when irregular
events occur and how to alert you to the event.
The system notifications include:
• HDD full: All installed HDDs are full.
• HDD error: Errors occurred while files were being written to the HDD, no
HDD installed or HDD had failed to initialize.
• Network disconnected: Disconnected network cable.
• IP conflicted: Conflict with IP address setting.
• Illegal login: Wrong user ID or password used.
• Video signal loss: Unstable video signal or video loss detected.
• Video standards mismatch: Video standards do not match.
• Abnormal record: No space on HDD to save recorded files.