Interlogix TVE Series - Manual (Page 32)

28 TVE-400/800-1600 H.264 IP Video Encoder User Manual
- Send e-mail : Send an e-mail with alarm information to a user or users
when an event occurs.
Under Trigger Alarm Output select the channel to trigger an external alarm
output when a motion detection event occurs
. See “To set up an alarm
output” on how to set up an external alarm output.
Select the channel to trigger recording when a motion detection event occurs.
If the camera is PTZ, select PTZ linking.
6. Click Save to save settings .
Video loss
Video may be lost if the video cable or camera develop a fault or are damaged.
You can set up your encoder to detect video loss and trigger a system
notification.
To configure video loss detection:
1. Click Device Configuration > Camera Settings > Video Loss. The Video
Loss window appears.