Interlogix TVE Series - Manual (Page 23)

TVE-400/800-1600 H.264 IP Video Encoder User Manual 19
Option Description
Receiver’s address Enter the e-mail address of the receiver.
5. Click Test to the test e-mail settings.
Note: We recommend that you test the e-mail settings after entering values in
the e-mail window.
6. Click Save to save the settings.
To configure NetHDD settings:
Note: Ensure that the network storage device is available within the network
and is properly connected. Also the network storage device must be
configured with NAS or IP SAN mode.
1. Click the Device Configuration > Network Settings > NetHDD Settings.
The NetHDD Settings window appears.
2. Enter the IP address of the network storage system and file path in the text
field.
3. Select the type of network storage system: IP SAN or NAS.
NAS mode: Enter the IP address of the storage device. The default file path
is /dvr/share, where the share name is user-defined during creating the DVR
of the network storage.
IP SAN mode: Enter the IP address of the storage device. The default file
path is iqn.2004-05.storos.t-service ID, where the service ID is user-defined
during creating the iSCSI volume of the network storage.
4. Click Save to add the configured network disk.
5. Initialize the added network disk.
Click Device Configuration > HDD Management to enter the HDD settings
menu. The capacity, free space, status, type and property of the added
network disk are displayed.