Interlogix TVE Series - Manual (Page 11)

TVE-400/800-1600 H.264 IP Video Encoder User Manual 7
The tool identifies:
• Device type
• Device MAC address
• IP address
• Number of video channels supported by the device
• Connection port
• Software version
• Device serial number
• DSP/firmware version
• Device subnet mask
3. To change the IP address and/or the subnet mask of the device, click the line
of the device address to be changed. The key device characteristics for that
device are listed in the right pane.
4. Click Modify to change the IP address. The IP address and device port
address fields will be available to change.
5. Change/modify the IP address and or subnet mask as required. Under Please
Input Password
, input the device’s logon password and press
Save .
6. Repeat this process for each device that needs to be modified. When all
changes to all discovered devices is complete, press Exit to close the tool.
Note: You must reboot to activate the new IP address or subnet mask.