Panasonic SC-AK15 - Manual (Page 21)

Recording ftom cpnipact discs
m
Press ± OPEN DECK 2 and insert the tape.
Cióse the holder by hand.
Tape direction is automaticaliy set to
Press REV MODE to select the reverse mode.
Every time you press the button:
1. ___
:One side is recorded, then recording stops auto-
maticaily.
, ciT): Both sides (front side —^ reverse side) are recorded,
then recording stops automatically.
Press CD.
DECK 2
[ ± OPEN y/
REVI/IQDE
J_t_i
OJJ-
Tape direction
©
R P E o : _ d
1 ^
Q ' N Q D I S C
Disc number
[ DISCI ] [ DISC2 ) [ DISC3 j ( DISCS )
..ji___
»REC/STOP
SZJ"
f'S'-, 1
Q
) n- n I
) u- U (
m
Load CDs into each of the trays.
(See page 12).
Press DISC 1 - DISC 5 to select the disc you want.
Pressing B wil! stop playback.
Press ®REC/STOP to start recording.
• If you selected “ czri” in step S, the direction will automa-
ticaily change to “ ztj ’’ when recording starts,
» The recording wiii proceed from the first track on the selected
CD and will continue on through the last track of the final disc
(page 13).
• The tape deck stops automatically when the CD is finished.
To stop recording
• To add a 4 second silent interval before stopping
Press B. The CO will stop automatically loo.
• To stop recording without a silent interval
Press ®REC/STOP. The CD will stop automatically too.
To start recording on the reverse side
Load a tape and change the tape direction as following.
1. Press TAPE DECK 1/2 and select tape Deck 2,
2. Press < and immediately thereafter b . The tape direction will be
shown as
To record from a specific point on a tape
Before recording, advance the taps to the point from where you want
to start recording.
To record programmed tracks
1. After step O. program the track you want (perform steps
O on page 15.)
2. Press »REC/STOP to start recording.
wt
C
I
%■
0»
c
0
u
&