Panasonic SC-AK15 - Manual (Page 18)

fó fapés
Types of tapes which can be played correctly:
The unit automatically identifies the type of tape,
NORMAL POSmON/TYPE I O
HIGH POSITION/TYPE 1! 0
METAL POSlTlON/TYPE IV O
You can use either deck 1 or deck 2 for tape playback.
Press TAPE DECK 1/2.
The power will come on automatically.
Press ± OPEN DECK 1 or ^ OPEN DECK 2 and
insert the tape.
Insert the tape with the exposed tape facing down.
Close the holder by hand.
Press REV MODE to select the reverse mode.
Every time you press the button:
T___ zL—
zr : One side is played, then playback stops automatically.
: Both sides (front side -> reverse side) are played one
time each, then playback stops automatically,
czn : Both sides are played 8 times each, then playback stops
automatically.
Press or to start playback.
The forward side (front side) will play.
The reverse side will play.
Adjust the volume level.
I
s
9)
§■ ■ I
o
§■
m MODE
-/II niNE/tlMEJiaj
Tape direction
±ld
D ■ PW ►
n Í „ g =
S' u (_
■ . ■ PLAV
i ■ ■ ■
PLiT .
J ■ t r p E y i . u - :
To stop tape playback
Press B .
To change the deck to be used ^
Press TAPE DECK 1/2 to select the deck you want to use when you
load cassettes into both decks.
To listen to 2 tapes consecutively
Load a tape into each deck and select “czr^”. Both tapes will be played
8 times each.
Playback is momentarily interrupted while playing back tapes, if you
open the other deck.
One-touch play
When power is OFF, play starts automatically when you press TAPE
DECK 1/2.