Ìjsfbitlhg to radiò hmade&sfs – Panasonic SC-AK15 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

ÌJsfBitlhg to radiò hmade&sfs
m
Press TUNER BAND to select “FM” or
“i
The power will come on automatically.
Every time you press the button; FM ^—> AM.
Press
TUNE
MODE
to
select
“PRESET” or
“MANUAL”.
Every time you press the button; MANUAL <—> PRESET.
PRESET: For preset stations
MANUAL: For non-preset stations
Press
V
or
A
to select the desired broadcast.
"ST" lights when an FM stereo broadcast is being received.
TUNED” lights when you precisely tune in a broadcast station.
Adjust the volume level.
Àuto tuning
k
With non-preset stations
TUN№ Sr
F
SB IB-
Received frequency
■tuwi; ■ it
- MB*
Auto tuning is an easy way to tune in non-preset stations in the
“MANUAL" mode.
Hold down either
V
or
A,
and release the button when the
frequency starts scrolling.
The radio will stop automatically on the first station it picks up.
• When there is outside interference, the radio sometimes stops on
a certain frequency where no station is broadcasting.
To stop auto tuning
Press either v or A again.
if noise is excessive in Hie FM stereo mode
Press FM WIODE/BP. “MONO” will light up.
Sound will be produced in monaural, but this also reduces noise.
Press the button again to cancel. “MONO" will go out.
Normally, you’ll want to listen in stereo, so leave "MONO” off. This
way, you can listen to stereo broadcasts in stereo, and monaural
broadcasts in mono.
You can preset an FM station in monaural by following the steps
under “Presetting oniy your favorite stations" on page 10. After
selecting the station in step 1, select “MONO" with FM MODE/BP,
then continue with steps 2 and 3.
• if you preset stations in memory, you can tune in a preset station
by simply selecting the preset channel with the numeric buttons
on the remote control.
1. Press TUNER on the remote control,
2. Press the numeric button{s) to select the desired preset
channel.
To select a two-digit channel:
Press a10 and then the two numbers you want within 10
seconds or so.
• Sound is momentarily interrupted if you ioad/unload tapes while
listening to an AM broadcast.
s
-S
E
«
&
,0
I