Panasonic SC-AK15 - Manual (Page 19)

Тс fast-forward or rewind the tape
Press or ^/ b >^ in the stop mode.
Tape direction To rewind To fast-forward
V" K
To find the beginning of ea program
(TPS: Tape Program Sensor]
Press or E>s»-/>eH during play.
Tape
direction
To play the current tune
from the beginning
To play the next tune
from the beginning
■V"
The TPS function searches for silent parts of about 4 seconds in
length which are normally found between tunes. As a result, it may
not function properly in the following cases
■ With short silent parts
• When noise occurs between tunes
• With silent parts found within tunes
ГЩ óniy)
Types of topes which can be recorded correctly
The unit automatically identifies the type of tape.
NORMAL POSITION/TYPE 1 О
HIGH POSITION/TYPE H О
METAL POSITION^YPE IV X
This system cannot make a recording or erasing correctly, if metai
position tapes are used.
To record from the beginning of the tope
You cannot record on the leader part of the tape. Before recording,
wind the tape past the leader to a point where recording can start
immediately.
Recording part
Leader tape
(no recording can be made)
How volume, sound quality/fteld and V. BASS
affect recording
The tape you are recording Is not affected whatever by changes in
volume, sound quality/field or V. BASS.
• In recording, sound quality/field are set automatically to “FLAT".
• You can change volume and V. BASS effect for the playback sound.
To erase a recorded sound
1. Press TAPE DECK 1/2.
2. Insert the recorded tape into Deck 2.
3. Press REV MODE to select reverse mode.
4. Press *REC/STOP.
iJfstTg
• You cannot open Deck 1 while recording.
• You cannot fast-forward or rewind one deck while recording with
the other.
«ft
e c 0 0
s s
о ?
..it №
V e fljj sS
tt о