Pan — round pan – Yamaha FX900 User Manual
Page 41
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
• PAN — Round Pan
This is a very sophisticated pan program that allows creation
of "rotary" pan in addition to straightforward pan effects.
Lch
DIR = <-R
DIR = L->
SPD L/R F/R
0.9 100 90
DIR MIX LVL
L-^ 90
0
SPD (Pan Speed: 0.1 — 20Hz)
Sets the speed of the PAN effect (i.e. how rapidly the signal
sweeps from channel to channel).
L/R (Left/Riaht Depth: 0 -100%)
Sets the "depth" of the pan sweep from left to right and right
to left.
F/R fFront/Rear Depth: 0 —100%)
This parameter sets the apparent depth of the sweep from
front to rear.
DIR fPan Direction: L -> R. L <- R)
Determines the direction in which the sound sweeps across
the stereo sound field.
MIX (Mixing Balance: 0 — 100 %1
Sets the balance between the direct and effect sound. Higher
values produce a greater proportion of effect sound In
relation to direct sound.
LVL fOutPUt Level: -°°. -30 — +QdB)
Determines the output level of the PAN effect.
40