Midi data format, Format des données midi, Midi-datenformat – Yamaha FX900 User Manual
Page 161: Transmission conditions, Transmission data, 1. channel information (channel voice message), 2. system information (system exclusive messages), Transmission conditions 2. transmission data
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

11. MIDI Data Format
11. Format des données MIDI
11. MIDI-Datenformat
1. TRANSMISSION CONDITIONS
2. TRANSMISSION DATA
2-1. Channel Information (Channel Voice
Message)
(1) CONTROL CHANGE
This message can be transmitted when the rear-panel MIDI
THRU/OUT switch is set to the "OUT" position.
Control change data corresponding to operation of foot
controllers connected to the FX900 or to an FC900
connected to the FX900 is transmitted on the MIDI channel
specified for the currently selected BANK. Control change
messages received at the FC900 MIDI MERGE IN connector
are transmitted on the channel on which they were originail
received.
STATUS
1 0 1 1 n n n n (BnH)
CTLNO.
0 p p p p p p p
CTLVALUE O v v v v v v v
n = 0(channeU1) —
n = 15 (channel #16)
c = 1 -31,64-95
v = 0 —127
(2) PROGRAM CHANGE
This message can be transmitted when the rear-panel MIDI
THRU/OUT switch is set to the "OUT" position.
Program change data corresponding to an FX900 program
selection and recall operation is transmitted on the MIDI
channel specified for the currently selected BANK. Program
change messages received at the FC900 MIDI MERGE IN
connector are transmitted on the channel on which they were
original! received.
STATUS
1 1 0 0 n n n n (CnH)
n = 0(channel#1) —
n = 15 (channel #16)
PROGRAM NO. O p p p p p p p
p = 0(PGM1) —
127(PGM128)
2-2. System Information (System Exclusive
Messages)
(1) 1 MEMORY BULK DATA
This message can be transmitted when the rear-panel MIDI
THRU/OUT switch is set to the "OUT" position.
The system exclusive data for the specified memory location
is transmitted when a BULK OUT MEM operation is
performed or when a 1 MEMORY BULK DUMP REQUEST
message is received. The data is transmitted on the MIDI
channel specified for the currently selected BANK.
STATUS
1 1 1 1 0 0 0 0 (FOH)
SYSTEM EXCLUSIVE
ID NO.
0 1 0 0 0 0 1 1 (43H)
YAMAHA
SUB STATUS
0 0 0 0 n n n n (OnH)
n = 0(channel#1) —
n = 15 (channel #16)
FORMAT NO.
0 1 1 1 1 1 1 0 (7EH)
UNIVERSAL BULK DUMP
BVTE COUNT
0 0 0 0 0 0 1 0 (02H)
0 0 0 0 1 1 0 0 (OCH)
HEADER
0 1 0 0 1 1 0 0 (4CH)
■L‘
0 1 0 0 1 1 0 1 (4DH)
“M-
0 0 1 0 0 0 0 0 (20H)
Space
0 0 1 0 0 0 0 0 (20H)
Space
0 0 1 1 1 0 0 0 (38H)
"8“
0 0 1 1 0 1 1 1 (37H)
7“
0 0 1 1 0 0 1 0 (32H)
"2“
0 0 1 1 0 1 0 0 (34H)
4"
DATA NAME
0 1 0 0 1 1 0 1 (4DH)
•M“ (1 MEMORY DATA)
MEMORY NO.
0 m m m m m m m
m = 0 (U00)-99(U99)
DATA
0 0 0 0 d d d d
258 BYTES
DATA
0 0 0 0 d d d d
CHECKSUM
0 c c c c c c c
*1
EOX
1 1 1 1 0 1 1 1 (F7H)
160