With the proper audio mode setting, your vcr can, Audio mode for recording, Audio mode for piayback – Panasonic PV-7664 User Manual
Page 33: Spatializer feature, Biinabba, F) g, O0) 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

With the proper audio mode
setting, your VCR can;
1) record and playback an MTS stereo
broadcast (main language) in stereo
Hi-Fi.
2) record and playback a monaural
broadcast (main language) or
Secondary Audio Program (sub
language) on the Hi-Fi tracks for
better quality monaural sound.
3) playback non Hi-Fi tapes in monaural.
When recording, the selected broadcast
sound is always recorded on the left
and right Hi-Fi tracks as well as the
normal monaural track. This means
your tapes can be played back on Hi-Fi
as well as non-Hi-Fi VCRs.
Audio Mode for Recording
(f) g
Push SAP/Hi-Fi repeatedly
g
(each push within 5
W
seconds) to select the
desired audio mode
(STEREO, SAP, or MONO).
Please refer to the “Receivable
Broadcast Types” section on page 32.
STEREO
SAP
MONO
The arrow indicates
your selection.
Do a recording.
See the “Record On a Tape" section on page 20.
Audio Mode for Piayback
Playback the tape.
See the “Playback a Tape" section on page 19.
Hi-Fi
Push SAP/Hi-Fi repeatedly
(each push within 5
seconds) to select the
desired audio mode
(HIFI or NORMAL).
Select "HIFI" to listen to your stereo
recordings with stereo sound, or
“NORMAL" for monaural sound.
HIFI
4
NORMAL
The arrow indicates
your selection.
Spatializer Feature
This feature allows you to enhance the stereo sound so that it seems to surround you.
Note: Your VCR needs to be hooked up to a stereo TV or stereo amp/receiver
with speakers (see page 32). For playback, tapes must be recorded in Hi-Fi
stereo. For TV viewing, programs must be broadcast in stereo.
Push MENU to
Q display the menu.
Push
AT
to select “SET
UP VCR,” and then push
► to display the “SET
UP VCR” screen.
....................... MENU ........................
BiinaBBa
SET CLÒCK
SET UP CHANNEL
SELECT
SET
END
A T KEY
► KEY
MENU KEY
Push
AT
to select
“SPATIALIZER,” and
then push ► to select
“ON” or “OFF.”
------------ SET UP VCR..................... -
REPEAT PLAY
BEEPER
SPATIALIZER
ON
ON
ON
SET UP COMMERCIAL ADV.
SELECT
SET
END
A ▼ KEY
► KEY
MENU KEY
o
i
(5
<
o
c
N
O
0)
3
D
}
o
Push MENU twice to return
Q to the normal screen.
Portions of this product manufactured under a licence from Desper Products,
Inc. SPATIALIZER, and the circle-in-square device are trademarks owned by
Desper Products, Inc.
When purchasing or renting prerecorded tapes, remember that only those recorded in Hi-Fi stereo will play back with
true stereo sound. Standard stereo tapes will play back with monaural sound.
In order to listen to Hi-Fi stereo playback, the VCR AUDIO (L/R) jacks must be connected to a stereo TV or an
external stereo amp and speakers. (See page 32.)
When adjusting the tracking during playback, the Hi-Fi audio sound may revert to norma! audio sound. This is normal.
There may be a difference in audio level between Hi-Fi and normal audio playback.
Rec Level Meter will show the audio level during recording or playback.
33