Panasonic PV-7664 - Manual (Page 20)

^ Record^On^T^ge
Check list before you begin.
O All connections are made.
(See pages 6-9.)
□ VCR is Plugged in.
TV is turned on and set to the VCR
channel {CH3 or CH4).
d)':
Insert a cassette with record tab.
VCR power comes on automatically.
□
Push CH A/T or
NUMBERED keys to
select a channel.
• Or, push CHANNEL A/T
on the VCR.
• Holding down CH A/V
will increase the channel
search speed.
• To record from an outside source, push CH A/T or
INPUT to select “LINEV or “LINE2" (see page 21).
CHANNEL
Up/Down
Multi
Function
Dispiay
SPEED
Push SPEED to change
the recording speed.
• SP = standard Play
LP = Long Play
SLP = Super Long Play
(See page 5.)
RECmME
o
Push REC/TIME on the remote
control or VCR to start recording.
• To edit out unwanted portions, push PAUSE to
pause the recording in progress.
To release, push PAUSE again.
(After the VCR has been in Pause mode for 5
minutes, it will stop automatically to protect the
tape and video head.)
One Touch Timer Recording (OTR)
The VCR starts recording and turns itself off at a preset time.
In step 4, push REC/TIME repeatedly to set the length of the
recording. Each push will change the stop time as shown.
C ►Normal Ree—►0:30—►1:00
Ay
1:00^
:30^ ■4;00'4—3:00-^2:00-<— 1:30
“TIMER” lights in the Multi Function Display.
The remaining recording time can be displayed by pushing
DISPLAY in OTR mode.
Push STOP on the remote
control or VCR to Stop recording.
STOP
Record One Program While Watching Another
1 Push VCR/TV while recording is in progress to turn
off the VCR indicator in the Multi Function Dispiay.
2
Use the TV channel controls to select a program.
The VCR will continue to record your program while you
watch any channel you choose.
• To switch bacK and forth between the recording and
viewing channel, push VCR/TV.
Selecting Channels at the VCR
2 Turn your TV and VCR on.
• VCR Indicator lights on the Multi Function Display.
If indicator doesn’t light, push VCR/TV to turn it on.
2 Use CH A/T on the remote control or VCR
to select channels.
• To switch back to TV channel selection, push
VCR/TV to turn VCR indicator off, or simply turn
the VCR power off.
20