Habey BIS-6590 - Manual (Page 9)

Caution
• Please make sure the thermal conductive adhesive and thermal pad are
properly coated and applied when installing the CPU and motherboard
MOS heatsink. For help and instructions please contact a qualified techni-
cian or your retailer, for optimal cooling performance.
• Only use the original DC 12V 10A power adapter supplied by the man-
ufacturer.
• It will be a normal for the chassis temperature to reach temperatures of
up to 40-50°C when the system is working.
• Please read this manual in detail before using this product.
• The product specifications and pictures listed in this manual are subject
to change with out prior notice.
Electrical Safety
• If the power supply is broken, do not try to fix it yourself. Contact a qual-
ified service technician or your retailer.
• When adding or removing devices to or from the system, ensure that
the power cables for the devices are unplugged before the signal cables
are connected. If possible, disconnect all power cables from the existing
system before you add a device.
• To prevent electrical shock hazard, disconnect the power cable from the
electrical outlet before relocating the system.
• Before connecting or removing signal cables from the motherboard,
please ensure that all power cables are unplugged.
• To prevent damage to the power cord, do not place heavy objects on,
stretch, or bend power cord. Damage to the cord may result in or electric
shock.
• Make sure that your power supply is set to the correct voltage in your
area. Incorrect voltage may cause personal injuries and damage the sys-
tem.
Operation Safety
• Before installing the motherboard and adding devices on it, carefully read
all the guides that came with the package.
• To avoid short circuits, keep paper clips, screws, staples, and any other
small metal objects away from connectors, slots, sockets and circuitry.
4