Habey BIS-6590 User Manual

Page 10

• Do not use the system where there is a lot of dust, humidity is high, or

where the system may come into contact with oil or steam, as this could

lead to fire.
• Ensure that the system does not come into contact with water or other

fluids. Ensure that no objects such as paper clips or pins enter the sys-

tem as this could lead to electric shock.
• Do not place the system in unsafe places. Do not allow the system to

receive strong shocks or to strongly vibrate. This may cause the system

to fall or topple over damaging the system.
• Do not use the system near heating equipment or in places where there

is likelihood of high temperature, as this may lead to excessive heat and

outbreak of fire.
• Do not use the system in places where it may be exposed to direct

sunlight.

2.1 Remove the Computer Cover

2.2 Install Motherboard

2.2.1 Install CPU & Thermal Pad

Remove the four screws

on cover and dismount the

cover.

Unlock the buckle and re-

move the CPU base cover.