Habey BIS-6590 - Manual (Page 46)

Load Defaults
Restore/Load Default values for all the BIOS setup options.
Save Changes and Exit
Press [Enter] to select this option and press [Enter] to confirm to save all
BIOS changes and Exit.
Discard Changes and Exit
Press [Enter] to select this option and press [Enter] to confirm to discard
all changes and exit.
Boot Override
Select the prior boot device.
Appendix
Appendix 1: Install Drives
Please install the driver as per the following steps:
Insert the programmed disk into CD-ROM, so installation of the driver
an be made either automatically or manually. Now manually installation
instructions are given as below:
1) A variety of options are available regarding manually installation, which
you can check from Device Manager.
2) Right click “my computer “, select “management”, and go to “Device
Manager”
3) Right click “display controller” in the menu of graphic card, select
“Properties “, click “Driver”, select “update driver”.
4) Select “Show the list of all drivers which are designated locations so
that choices can be made from it “, select “next.”
5) Select the location of display driver, click “ok”
6) Complete the installation, restart the system.
Proceed with the installation of other drivers after restarting the system,
till all installations are completed. Then user can check from the device
manager that it says device is working.
41