Habey BIS-6590 User Manual
Page 34
Section 4 BIOS Setup
BIOS functions as a bridge connecting hardware and operating system.
Hardware and software are upgrading all the time, so when your system
goes wrong, for example, your system can not support the newest CPU,
you need to upgrade BIOS to keep up with the latest technology.
FPT.EXE is the FLASH IC program for BIOS to upgrade, which needs to
be run in DOS mode. Please use a boot disk to load DOS, then run FPT.
EXE to upgrade BIOS (for example: write XXXX.BIN into FLASH IC)
Operational Commands:
A:\ fpt /f 7937I702.BIN
If you need to add other parameters after the order format, please add
Note:
1. BIOS Flash is only executed when it is necessary
2. Please use the BIOS SETUP Utility in the CD-ROM provided by us or
download the latest version on related websites
3. Please do not power off or reboot the system when flash BIOS, other-
wise, the BIOS maybe be damaged or system may not be able to boot
again.
4. After finishing BIOS Flash, load the optimal defaults manually
5.To prevent any unexpected problems, please backup your BIOS in ad-
vance.
AMI BIOS Description
When the computer is power on, BIOS will conduct self-diagnosis to its
hardware on motherboard and configure hardware parameter, finally the
operating system will take control. BIOS is the communication bridge
between hardware and O/S. Correct configuration of BIOS is critical for
maintaining system stability and its optimized performance.
BIOS Settings
1. Power on or restart the system, self-detection message will display on
the screen.
2. When system pops out the prompt “Press to enter setup,
to Popup menu “ , please press key to enter BIOS setup interface.
3. Use the “←↑→↓”to select the option which your want to modify, press
4. Use the “←↑→↓”and
ify BIOS options that you choose.
5. At any time, press
29