Habey BIS-6590 - Manual (Page 12)

2.1.2 Dismount the Rear Panel
2.1.3 Install Motherboard
Loosen the four screws on
the side of the rear panel
and remove the rear panel
module.
Align the semi-circle guide
holes of the motherboard
with the four guide posts
on the bracket and place
the motherboard on the
back cover evenly. Insert
the expansion slots into
the expansion board con-
necting finger.
Tighten the 7 screws
onboard that fix the moth-
erboard (M3x6mm screw
x7PCS).
7