Habey BIS-6590 - Manual (Page 33)

3.3.5 DIMM Slot
Board with 2x dual channel DIMM slots support DDRIII 1066/1333 MHz
RAM up to 16GB.
3.3.6 Mini PCIe Socket
Board provides one MINI PCIe socket. If you use the Mini PCIE WiFi,
the status of which will be determined by the wireless network that you
choose.(MINI PCIe port can support WiFi, 3G module or SSD (EPC SDD
or mSATA SDD optional).
3.3.7 PCIe X16 Slot
Board provides one non-standard PCIe X16 slot. H61 Chipset supports
ACP-230 card (with PCIe/PCI port). H61 chipset supports PCIe port
only, no PCI port. Chipset Q77 support ACP-230 and ACP-228P cards,
supporting PCIe & PCI port.
1) System Power LED Pins (Pin 1/2 for PWRLED)
Connect system power LED cable with these pins.(pin 1 is LED anode)
When system is power on, power LED is on: when system is power off,
power LED is off.
2) HD LED Pins (Pin3/4 for HDD LED)
Case panel with one HD LED indicating HD status. When HD read and
write, the LED will flash, indicating the device is working. Connect the
LED cable to the LED pins ( Pin3 is LED anode).
3) Buzzer Pins (Pin5/6 for SPEAKER)
External Speaker Pins.
4) Reset Button Pins (Pin7/8 for RESET)
Connect the reset button cable to these two pins. When system fails,
reset button can make the system continue to work and no need to turn
on / off the power.
5)Power Button Pins (Pin 9/10 for POWER BUTTON)
Connect these two pins to the bounce switch on the chassis to connect
or disconnect the power supply.
28