ITC Hemochron Response Whole Blood Coagulation System - Manual (Page 32)

32
DEFAULT SETTINGS
Factory default settings for the HEMOCHRON Response system are listed below:
Parameter Value
Well1 Records PAT = 0; QC = 0
Well2 Records PAT = 0; QC = 0
Battery % NO
Plot Test NO
COM1 Port YES
COM2 Port NO
INT Print YES
EXT Print NO
Log Data NO
Enable FF NO
COM1 9600
COM2 9600
Print System Prints system test results.
Beep Volume 50%
Contrast 50% (Adjusted for LCD display)
Brightness 50%
Auto Shutdown 60 min
Flashlight 30 min
Languages ENGLISH
PPID 167-089-247-139
Default Assay UNKNOWN
Time 24 Hour
Date MM/DD/YYYY
PID Required NO
OID Not Required
PID Digits 0
Clock ON
Active Users 0
Edit Lockout NO
RxDx Active NO
LQC Select 0
LQC Int. 0
ESV Select 0
ESV Int. 0
Start Date 01/01/01
Start Hours 0
911's Well1 0
911’s Well2 0
QC Hide NO
Reuse Hrs PID 0
Reuse Hrs OID 0
Print Heading --
User Notes All 9 Blank
Printed From ITC Intranet