Cab combo workshop maintenance – Barranca Diamond CAB COMBO WORKSHOP User Manual
Page 30

30
SUBMERSIBLE PUMP
Periodically remove the plastic inlet cover on the submersible water pump (fig 67 & 68). Remove the
filter element (fig 69) and clean any obstructions such as sludge or rock mud that may be found. Clean
the filter with warm, soapy water. Replace the filter (fig 70 & 71) and test the pump to ensure it's func-
tioning properly.
Fig 67 - Water Pump
Fig 68 - Slide pump inlet cover off the
pump body
Fig 69 - Slide the filter element out the
back of the inlet cover
Fig 70 - Replace clean filter
Fig 71
CAB COMBO WORKSHOP
MAINTENANCE