Barranca Diamond CAB COMBO WORKSHOP - Manual (Page 10)

10
CONTENTS
In the shipping crate, you will find one Barranca Diamond Cab Combo Workshop, one 6" x 0.020 x 5/8"
303 Pro diamond blade, one Ground Fault Circuit Interrupter (GFCI) and one 1" x 1" x 6" sharpening
stick.
If included as part of your specific order you will also find a variety of accessories.
UNPACKING
Your Cab Combo Workshop has been shipped from the factory thoroughly inspected and tested. Re-
move the crating material (wood and plastic) from the baseboard and around the machine carefully us-
ing Phillips and standard screwdrivers, and a box cutter knife. Any accessories should be removed from
the unit and put aside.
TRANSPORT
For safe transport, lubricant should be removed from the saw tank coolant and wheel reservoirs of the
Cab Combo Workshop. Removal of the 6" diamond blade is recommended to prevent damage during
transport.
CAB COMBO WORKSHOP SETuP