Barranca Diamond CAB COMBO WORKSHOP User Manual
Page 12

12
INSTALLATION OF BLADE (continued)
Fill the coolant reservoir so that the lubricant fluid covers the bottom 1/4" of the blade (fig 6). Do not
overfill the oil reservoir, as excess fluid will result in unnecessary spraying of fluid while sawing, possi-
bly causing damage to the arbor bearings and motor. Once the lubricant has been added, position the
cork gasket on top of the reservoir (fig 7) and reattach the saw table with the four mounting screws (fig
8).
Fig 6 - Fill the coolant reservoir so that
the lubricant fluid covers the bottom
1/4" of the blade
Fig 7 - Cork tank gasket in place prior
to mounting saw table
Fig 8 - Attach the saw table by
installing and tightening the 4 flat
head machine screws
CAB COMBO WORKSHOP
SETuP