IKA C 1 Package 1/10 - Manual (Page 28)

28
Calibration archive
After selecting the appropriate archive is displayed.
INFO: In each calibration archive up to 15 calibrations can be
stored. A calibration performed is automatically added to
the appropriate archive
Displays the line number, the name of the calibration and the
result (C value).
Below the list of the current C-value of the system is shown (in
red). By confirming the multifunctional element details concerning
the measurement are displayed. For the C-value calculation, select
„Edit“.
INFO: The C-value can also manually at Main Menu > Basic
settings entered alternative.
Calibration archive: Edit
By clicking the „EDIT“ button in the list view, another screen
appears to select the edit mode.
Selection C values :
• Calibrations can contribute to the redefinition of the C-value
be selected
Print:
• Calibrations can be selected and printed
Delete:
• Calibrations can be selected and deleted
By selecting one of these menu items to the list view is displayed
again. When heading of the screen active editing is displayed.
The „EDIT“ button is replaced with an „OK“ button.
Measurement archive: Delete all
By clicking the „OK“ button, the following dialog appears:
By confirming with „OK“, all measurements will be deleted.
C1 092014