Measurement procedure – IKA C 1 Package 1/10 User Manual
Page 21

21
Measurement procedure
During a measurement, different phases are passed through.
These phases are described below
•
Phase 1:
Filling the calorimeter with water
•
Phase 2:
Filling the calorimeter with oxygen (Note: If the option-O
2
flushing under the main menu " Basic Settings is selec-
ted, the inner vessel is two times with Oxygen rinsed)
NOTE:
Alternatively, to display the graph may also have a detailed
view of be selected with the following information:
•
Current temperature:
Mean value of the actual temperatures
•
Ignition temperature:
the currently measured temperature
•
Measurement time:
Aisplay: duration of the measurement
NOTE:
After switching on the calorimeter C1 or after a break of 2
hours during the filling of the calorimeter C1 is still carried
out an intermediate emptying (H
2
O - purge). Once the
water sensor detects water, the stirrer is switched on.
After a short waiting period begins phase 2.
C1 092014