Connecting to a switchboard – BT 500 User Manual

Page 85

Verve 500 – New Style – Edition 3 – 07.09.06 – 7706

If you experience any problems, please call the Helpline on 0870 242 6652 or email [email protected]

Connecting to a switchboard

This product is intended for use within the UK for

connection to the public telephone network and

compatible switchboards, which support tone and

pulse dialling and timed break recall. If in doubt

please consult your service provider.

Inserting a pause

With some switchboards, after dialling the access

code you may have to wait for a moment while the

switchboard picks up an outside line so you will need

to enter a pause in the dialling sequence.
Press and hold

to insert a pause (P) before

entering the telephone number.
You may also need to enter a pause when storing

international numbers or charge card numbers.

Recall

You may need to use the recall function if you are

connected to a switchboard/PBX (Private Branch

Exchange), contact your PBX supplier for further

information. The recall function is set to timed break

recall and is also used for BT Calling Feature.

General information