Using the phone – BT 500 User Manual

Page 15

Verve 500 – New Style – Edition 3 – 07.09.06 – 7706

If you experience any problems, please call the Helpline on 0870 242 6652 or email [email protected]

Using the phone

Switch the handset power on/off

1. From standby mode, press and hold

to switch off. You will

hear a long beep and the display will go blank.

Press and hold

to switch back the handset on. You will

hear a long beep and the standby display will be shown.

Make an external call

1. Press .

2. When you hear the dialling tone, dial the number you want.

Preparatory dialling (pre-dial)

1. Enter the number you want to dial first.

2. Press to

dial.

End a call

1. Press .

Place the handset back on the base (if auto answer is set
to on).

When you make a call,

Calling

and

the

icon are displayed and the red

In Use light on the base comes on,

Call timer

Your handset will automatically time

the duration of all external calls. The

handset display shows the call

duration both during and for a few

seconds after your call.
The

symbol on the display

indicates when you are in range of the

base. If the

symbol flashes and

you hear a warning beep during a

call, you are out of range and will

need to move closer to the base.

Press the

soft key to delete an

incorrect digit.
The pre-dial number can be up to 24

digits long.