BT 500 - Manual (Page 45)

45
Verve 500 – New Style – Edition 3 – 07.09.06 – 7706
If you experience any problems, please call the Helpline on 0870 242 6652 or email [email protected]
5. Press UP or DOWN to select the setting you require and
select
OK
.
6. Press to exit and return to standby.
Time stamp on/off
With this setting on, your BT Verve 500 will save and
announce the day and time with each recorded message.
1. Press
Menu
to open the main menu.
2. Use the NAVIGATION buttons to highlight the symbol
and press
OK
to select.
3. Press DOWN to highlight
Setting
and press
OK
.
4. Press DOWN to highlight
Time Stamp
.
5. Press the right soft key to select either
Off
or
On
.
6. Press to exit and return to standby.
Monitoring/call screening
With monitoring set to on, when the answering machine
takes a call, you can listen to the caller leaving a message
over the loudspeaker. If you decide you want to take the call
in person, you can pick up the handset or press
/ .
With monitoring set to off, you will not be able to hear the
caller leaving a message.
If time stamp is on, a ✓ will be
displayed alongside the setting.
If time stamp is set to off, the date
and time will not be announced and
will be replaced by a 2 second pause.
Answering machine
The default setting is on.
If monitoring is on, a ✓ will be
displayed alongside the setting.
The answering machine automatically
stops recording if you take the call
in person.