BT 500 - Manual (Page 16)

Receive a call
When you receive a call, the phone rings and the icon
flashes in the display.
To answer the call:
1. If your handset is on the base and auto talk is on, pick up
the handset.
Or
If your handset is on the base and auto talk is off, pick up the
handset and press
.
Or
If your handset is off the base, press .
Earpiece/receiver volume
During a call you can adjust the volume of the
earpiece/handset receiver. There are 5 volume settings,
which are shown as Volume 1, 2, 3, 4 or 5 on the display.
1. Press UP to increase or DOWN to decrease the volume.
As you increase or decrease the volume, the volume level is
displayed on the screen.
Verve 500 – New Style – Edition 3 – 07.09.06 – 7706
If you experience any problems, please call the Helpline on 0870 242 6652 or email [email protected]
16
Caller Display
If you have subscribed to your
network’s Caller Display service, the
caller’s number (or name if stored in
the phonebook) is displayed instead
of
External Call
. See page 57 for
more information.
If the number is longer than 15 digits,
the display will only show the last 15
digits entered.
Auto answer
As long as you have auto answer set
to ON you can just pick the handset
up off the base to answer a call. If you
have switched it off, you will need to
press . Auto talk OFF is the default
setting. For more information on auto
answer, see page 33.
Internal calls
If the call is from another internal
handset, the number of the calling
handset will be displayed, instead of
External Call
.
You can also adjust the earpiece /
receiver volume using the menu, see
page 29.
Using the phone