BT 500 User Manual
Page 39
39
Verve 500 – New Style – Edition 3 – 07.09.06 – 7706
If you experience any problems, please call the Helpline on 0870 242 6652 or email [email protected]
Recall time
Recall is used when connected to certain switchboards, for
transferring calls to another extension number, and for some
network services, such as Call Waiting. Contact your network
or switchboard provider for advice on how to use the button.
You may need to change the recall time according to your
switchboard. The recall settings are 100ms, 200ms, 500ms
and 900ms. The default setting for recall in the UK is 100ms.
1. Press
Menu
to open the main menu.
2. Use the
NAVIGATION
buttons to highlight the
symbol
and press
OK
to select.
3. Press
DOWN
to highlight
Base Settings
and press
OK
.
4. Press
UP
or
DOWN
to highlight
Recall Time
and press
OK
.
5. Press
UP
or
DOWN
to highlight the setting you want and
press
OK
to confirm.
6. Press
to exit and return to standby.
Pause time
When using your BT Verve 500 with a switchboard, you may
need to enter a pause to allow time for you call to be
connected to an outside line.
Please consult your switchboard
provider if you are unsure which
setting you require.
Only change this setting if advised to
do so by your switchboard provider.
Phone settings