BT 500 User Manual

Page 34

Verve 500 – New Style – Edition 3 – 07.09.06 – 7706

If you experience any problems, please call the Helpline on 0870 242 6652 or email [email protected]

Handset Settings

is highlighted, press

4. Press

DOWN

to highlight

5. Enter your 4 digit System PIN code, and press

Registering …

is displayed.

At the base:

6. Press and hold

, until you hear a beep tone.

Release the

button and the phone will remain in registration mode for 60
seconds while the handset attempts to register with the base.

When registration is successful, the new handset will
automatically be allocated the next available handset
number. This number will be shown in the handset display
when in standby mode.

Dim mode

With Dim mode set to on, after a pre-set period of inactivity,
the display backlight will reduce to 10%.

With Dim mode set to off, the display will go completely blank
after the pre-set period of inactivity.

When you press a keypad button, the display backlight will
come on as normal.

1. Press

to open the main menu.

2. Use the

NAVIGATION

buttons to highlight the

symbol

and press

to select.

The default PIN code is 0000.
Press

to exit and return to standby

at any time.

When set to On, the handset uses

more power and so the talk and

standby times will be reduced.

Phone settings