BT 500 - Manual (Page 48)

48
Verve 500 – New Style – Edition 3 – 07.09.06 – 7706
If you experience any problems, please call the Helpline on 0870 242 6652 or email [email protected]
Check your outgoing message
1. Press
Menu
to open the main menu.
2. Use the NAVIGATION buttons to highlight the symbol
and press
OK
to select.
3. Press UP or DOWN to highlight
Outgoing Message
and
press
OK
.
4. Press UP or DOWN to highlight
Replay
and press
OK
.
5. Press UP or DOWN to select the message you want and
press
OK
. The stored message is played back to you.
6. Press to exit and return to standby.
Select the outgoing message answer mode
You can select which outgoing message is played to callers.
You can select from the following outgoing messages:
Outgoing Msg 1 – your own Answer and Record message.
Outgoing Msg 2 – your own Answer Only message.
Answer record – default Answer and Record message.
Answer only – default Answer Only message.
1. Press
Menu
to open the main menu.
2. Use the NAVIGATION buttons to highlight the symbol
and press
OK
to select.
When the answering machine is set to
Answer Only, the message counter
will display
Ao
.
Answering machine